This Safety Shoe From The MASCOT®FOOTWEAR INDUSTRY Range is certified Safety Class S3; Ultra Slip Resistant Sole; EN ISO 20345: 2011 The purpose of the toe cap is to protect the toes against external blows and pressure. The cap has been tested and can resist blows and pressure of 200 joules (EN 12568). The ergonomically correct shaped aluminium toe cap has a spacious fit that allows place for the toes to move, e.g., when kneeling, and provides additional protection for the little toe and the big toe.; Nail protection made of special fibres. The nail protection is certified under EN ISO 20345, and complies with the demands for S3-footwear. The advantage is that the footwear is more flexible and gives better protection in warm and cold conditions which provides a high degree of comfort for the wearer.; The specially developed multi-functional shank is made of a stiff nylon material. The shank stabilises the middle part of the foot and makes the footwear bend at the right position. This shank includes a small shock-absorbing cushioning pad. The position of the shank ensures that the heel is in constant contact with this cushioning area, which provides a good foothold.; A scuff cap is an extra toe reinforcement on the outside of the upper leather. The toe reinforcement increases durability significantly, which prolongs the lifetime of the footwear. The footwear is suitable for kneeling work.; A sole edge under the sole prevents slippage on a ladder.; All of MASCOT’s comfort soles are shock-absorbing in the entire sole. This provides good walking comfort.; The sole is oil and petrol resistant.; The comfort sole is made of PU and the running sole is made of rubber. Rubber is very heat resistant and can resist temperatures up to 300°C contact heat. All MASCOT PU/rubber soles are oil and petrol resistant as well as resistant to certain chemicals.; Look for this symbol if you want to be absolutely sure that your footwear does not leave marks on the floor. Footwear with this symbol is provided with a sole of PU/PU, which leaves no scuff marks.; Look out for this symbol if you want footwear that is waterproof. Footwear bearing this symbol will keep your feet dry throughout the entire working day.; Footwear labelled with CI is cold isolating according to standard EN ISO 20345. Footwear with this label is made to limit temperature fluctuations of maximum 10° C in 30 minutes at temperatures down to -17° C. Your feet are therefore protected when you work in lower temperatures or on cold surfaces.
Choosing a selection results in a full page refresh.